
Advantages of SANYO stepper motor 103H8223-5241
- Categories:Solution
- Author:rain
- Origin:capital
- Time of issue:2025-05-27 09:14
- Views:
(Summary description)103H8223-5241 belongs to the SANYO two-phase 86 series stepper motor
Advantages of SANYO stepper motor 103H8223-5241
(Summary description)103H8223-5241 belongs to the SANYO two-phase 86 series stepper motor
- Categories:Solution
- Author:rain
- Origin:capital
- Time of issue:2025-05-27 09:14
- Views:
Advantages of SANYO stepper motor 103H8223-5241
103H8223-5241 belongs to the SANYO two-phase 86 series stepper motor, which has the following advantages:
High torque output: The holding torque of this motor is 6.85N. m (70kgf. cm). A higher holding torque enables the motor to provide strong driving force during operation, suitable for applications that require high torque, such as CNC machine tools, automated production lines, etc. It can ensure that the motor can accurately drive the load, achieve precise position control and motion.
Good electrical performance: Its rated voltage is 2.7V, phase current is 6A, phase resistance is 0.45 Ω, and phase inductance is 3.4mH. This electrical parameter configuration enables the motor to maintain stable current and voltage during operation, thereby ensuring stable motor performance and reducing errors and faults caused by electrical parameter fluctuations.
High precision positioning: The step angle is 1.8 °, which means that the motor can rotate accurately at a small angle during operation, thereby achieving high-precision position control.
In some devices that require high positional accuracy, such as laser engraving machines, coordinate measuring instruments, etc., this motor can meet the needs of high-precision positioning and improve the processing and measurement accuracy of the equipment.
Reliable insulation performance: insulation strength of 1000VAC, insulation resistance of 100M Ω (500VDC), insulation type of B. Good insulation performance can effectively prevent the electrical components inside the motor from being disturbed and damaged by external factors, improve the safety and reliability of the motor, and extend its service life.
Strong load capacity: Radial load can reach 220N, axial load is 60N (load point is at 1/3 from the end of the shaft). Capable of withstanding large radial and axial loads, suitable for various mechanical structures and working environments. In practical applications, it can better cooperate with other mechanical components to ensure the stability and reliability of the entire system.
How to maintain SANYO stepper motor 103H8223-5241 normally?
Maintain cleanliness: Regularly clean the surface of the motor of dust, oil, and debris to prevent their accumulation from affecting heat dissipation and normal operation. You can use a clean soft cloth to wipe the motor housing. For some stubborn stains, a mild cleaning agent can be used, but be careful not to let the cleaning agent enter the interior of the motor.
Check installation condition: Ensure that the motor is securely installed and the screws are not loose. Loose installation can cause vibration of the motor during operation, which not only affects accuracy but may also damage the motor and other related components. Regularly check whether the installation base is flat, deformed or damaged, and repair or replace it in a timely manner if there are any problems.
Lubrication and maintenance: Although stepper motors usually do not require frequent lubrication, proper lubrication can reduce friction and extend their service life. In general, according to the recommendations of the motor manufacturer, an appropriate amount of lubricating grease should be added to key parts such as bearings of the motor at regular intervals of operation time or mileage. Pay attention to selecting lubricating grease suitable for the working environment of the motor, and avoid using too much lubricating grease to prevent oil leakage and pollution of the motor.
Electrical connection inspection: Regularly check whether the power lines, signal lines, and other connections of the motor are in good condition, whether they are loose, damaged, or oxidized. Ensure that the wiring terminals are securely fastened, and tighten them promptly if there is any looseness. For damaged or oxidized wires, they should be replaced promptly to prevent poor contact from causing abnormal motor operation or damage.
Maintenance of heat dissipation system: Ensure good heat dissipation of the motor, check whether the heat dissipation fan is running normally, and whether the heat dissipation fins are blocked or damaged. If the motor operates in a high-temperature environment, additional heat dissipation measures such as installing cooling fans or improving ventilation conditions can be considered to prevent the motor from overheating.
Regular performance testing: Use professional testing equipment to regularly test the performance of the motor, such as torque, speed, step accuracy, etc. When performance indicators deviate from the normal range, analyze the reasons in a timely manner and take corresponding measures, such as adjusting driver parameters, inspecting internal components of the motor, etc.
Avoid overload operation: strictly follow the rated parameters of the motor to avoid prolonged overload operation. Overload can cause severe motor heating, accelerate motor aging, and even lead to motor failure. When designing and using the system, it is necessary to select the appropriate type to ensure that the motor has sufficient margin to cope with various working conditions.
Storage and maintenance: If the motor needs to be stored for a long time, it should be placed in a dry, well ventilated environment to avoid moisture, rust, and corrosion. At the same time, the motor should be powered on at regular intervals to prevent damage to the electronic components inside the motor due to long-term disuse.
Capital Technology Co., Limited is the chief agent of SANYO DENKI, one of the leading enterprises of the cooling fan industry. We are a factory who also have our own independent brand CAPITAL product series. The main products are cooling fan, DC/AC fan, radiator, filter, reactor etc. We can provide customer with the most professional and perfect technical support, welcome to contact me at anytime at rainlee@szcpt.com.
相关产品
Copyright©2020 Capital Technology Co., Limited.