solution-Capital-Cooling fan manufacturer

Service Hotline

0755-27087416/18316996909

Solutions

Cooling solution

Home page

What is the service life of SanAce 12038B24H fan?

What is the service life of SanAce 12038B24H fan?

What is the service life of SanAce 12038B24H fan? The service life of SanAce 12038B24H fan is generally around 40000 hours. But the actual service life will be affected by various factors, as follows: Bearing type SanAce fans usually use ball bearings, which have a longer lifespan than oil containing bearings. Ball bearings can be used for 50000-100000 hours under normal operating conditions, but if the fan is operated at high speed and high load for a long time, the wear of the bearings will increase and the service life may be shortened to about 30000 hours. Usage environment Temperature: In high-temperature environments, such as long-term use in environments above 40 ℃, the aging rate of the lubricating grease in the electronic components and bearings inside the fan will accelerate, which may reduce the lifespan of the fan by about 30%. In low-temperature environments, the lifespan of fans may be relatively extended. Humidity: If used in environments with high humidity, such as relative humidity exceeding 80% for a long time, it may cause the electrical components of the fan to become damp and rust, affecting its performance and lifespan. In severe cases, it may shorten the lifespan of the fan by about 50%. Dust: When used in environments with high levels of dust, dust can easily accumulate on the blades, bearings, and motor windings of the fan, increasing the load and wear on the fan. It may also affect the heat dissipation effect, causing the fan to overheat and generally shortening its lifespan by about 20% -40%. Frequency and duration of use If the fan runs continuously for a long time, exceeding 12 hours per day, and is often in a high-speed state, the wear of its internal components such as motors and bearings will accelerate, which may shorten the lifespan of the fan to about 20000 hours. On the contrary, if the frequency of use is low, the daily operating time does not exceed 8 hours, and most of the time it is in a low-speed state, the lifespan of the fan may be extended to over 50000 hours. Maintenance and upkeep Cleaning: Regularly cleaning the dust and debris on the fan blades, motor casing, and hood can reduce the load and wear of the fan, maintain its good heat dissipation performance, and generally extend the lifespan of the fan by 20% -30%. Lubrication: For fans using ball bearings, adding an appropriate amount of lubricating grease in a timely manner can reduce the friction and wear of the bearings, extend the service life of the bearings, and thus extend the overall life of the fan, which can be extended by about 10% -20%. Capital Technology Co., Limited is the chief agent of SANYO DENKI, one of the leading enterprises of the cooling fan industry. We are a factory who also have our own independent brand CAPITAL product series. The main products are cooling fan, DC/AC fan, radiator, filter, reactor etc. We can provide customer with the most professional and perfect technical support, welcome to contact me at anytime at rainlee@szcpt.com.

2025/01/14

Filter SH420-20

Filter SH420-20

Filter SH420-20 Product Features Dual section structure: This dual section design typically provides better filtering performance and can effectively suppress electromagnetic interference (EMI), especially for some high-frequency interference signals. Compared to single section filters, it has better attenuation ability. Suitable for AC single-phase power supply: It clearly indicates its application in AC single-phase power supply systems, which can filter out clutter and harmonic components in the power supply, making the output power supply purer, providing stable and clean power supply for connected devices, and reducing equipment failures and performance degradation caused by power interference. application area Commonly used in electronic devices and systems that require high power quality and are sensitive to electromagnetic interference, such as: Industrial automation control system: devices such as PLC (Programmable Logic Controller), sensors, drivers, etc., ensure the stable operation of the system and avoid misoperation or data transmission errors caused by power interference. Communication equipment: such as base station equipment, switches, routers, etc., to ensure the quality of communication signals and the normal communication function of equipment, and to reduce the impact of electromagnetic interference on communication signals. Medical equipment: such as medical monitors, diagnostic devices, etc., provide pure power to the equipment to prevent power interference from affecting the measurement accuracy and diagnostic results of medical equipment, ensuring the safety and reliability of medical equipment. Usually, the size of such filters is roughly around 100mm-200mm in length, 50mm-100mm in width, and 50mm-100mm in height, but this is for reference only. The specific size is subject to the actual specifications of the product. The operating temperature range of a typical medium performance compact filter is between -25 ℃ and+85 ℃. The rated current of power filters is usually between 1A and 10A, and the rated current of SH420-20 may be within this range. Capital Technology Co., Limited is the chief agent of SANYO DENKI, one of the leading enterprises of the cooling fan industry. We are a factory who also have our own independent brand CAPITAL product series. The main products are cooling fan, DC/AC fan, radiator, filter, reactor etc. We can provide customer with the most professional and perfect technical support, welcome to contact me at anytime at rainlee@szcpt.com.

2025/01/10

SanAce waterproof blower

SanAce waterproof blower

SanAce waterproof blower SanAce waterproof blower has the following characteristics and advantages: characteristic Excellent waterproof performance: The shell has been specially treated to effectively prevent moisture infiltration. The motor and circuit parts also have special sealing treatment, which makes them less susceptible to moisture and water ingress in humid environments, and can work normally. For example, in some outdoor communication base stations, even in rainy weather, they can operate stably. Equipped with dust-proof and anti-corrosion functions: The shell is made of high-quality materials that can resist corrosion and wear from various chemical substances. Good sealing performance prevents dust and dirt from entering the interior of the fan, enabling it to operate stably for a long time in harsh environments, such as in the chemical, petroleum and other industrial fields, effectively resisting dust and chemical corrosion. High temperature and low temperature resistance: The shell is made of materials that are resistant to high and low temperatures, and its performance is stable in extreme environments. Whether it is a high-temperature metallurgical factory or a low-temperature cold storage environment, it can ensure normal operation and work efficiency. advantage Widely applicable: Widely used in industrial fields such as chemical, petroleum, power, metallurgy, etc., providing reliable ventilation and exhaust support for production and processing. It is also used in public places such as stations, docks, tunnels, etc., providing effective solutions for air circulation and environmental control. Rich product models: There are multiple models to choose from, including 9W1BM12P2H001, 9W1BM24P2H00, 109BJ12HC2, etc. Different models have their own characteristics in terms of current, power, speed, exhaust volume, negative pressure, noise, etc., which can meet the needs of different users. Partial product models and parameter examples SanAce97W SANYODENKI 9733 DC fan: Model: 9W1BM24P2H00 Size: 97 × 33mm Voltage: DC24V Operating voltage: 12V, 24V Service life at working temperature of 40 degrees Celsius: 70000h Service life at working temperature of 60 degrees: 40000 hours Temperature range: -20-70 degrees SanAce SanAce 12732 Low Power High Wind Pressure Blower: Model: 109BJ12HC2 Blade diameter: 127 × 32mm Rated speed: 2400R P.M Maximum flow rate: 0.78m ³/Min [27.5CFM] Voltage: 12V Current: 0.52A Motor power: 6.24W Noise: 46dB (A) Capital Technology Co., Limited is the chief agent of SANYO DENKI, one of the leading enterprises of the cooling fan industry. We are a factory who also have our own independent brand CAPITAL product series. The main products are cooling fan, DC/AC fan, radiator, filter, reactor etc. We can provide customer with the most professional and perfect technical support, welcome to contact me at anytime at rainlee@szcpt.com.

2025/01/07

SanAce oil proof fan

SanAce oil proof fan

SanAce oil proof fan is a cooling fan with oil proof function produced by SanAce Electric Company. The following is its related introduction: characteristic Excellent oil resistance performance: The impeller and magnet components are made of oil resistant materials, which can effectively protect the winding and electronic components from oil mist erosion, ensuring stable operation in oil mist environments. Long lifespan: For example, the SanAce 40WF model fan has an expected service life of up to 40000 hours in oil mist environments, reducing equipment maintenance hours and costs. High reliability: Through strict l10 level certification, it has been shown that it has a 90% survival rate when operating continuously in free air at rated voltage at an ambient temperature of 60 ℃. Common models and parameters 9WF1224H101: This model of fan is a DC fan with a voltage of 24V and a blade diameter size of 12012025. SanAce 40WF 9WFA0424G6001： The specification is 404020mm, the operating voltage is 24V, the service life is 70000 hours, the temperature range is -20-70 degrees, the current is 0.11A, the output power is 2.6W, the speed ratio is 17000 RPM, the exhaust air volume is 10.9 CFM, the air pressure is 170 Pa, and the noise is 48 DB 3. application area Suitable for cooling equipment such as machine tools and industrial robots in automated manufacturing factories, and widely used in various occasions that require high reliability and high-performance cooling fans, such as working environments with oil mist or oil stains in industries such as food processing, chemical, and printing Capital Technology Co., Limited is the chief agent of SANYO DENKI, one of the leading enterprises of the cooling fan industry. We are a factory who also have our own independent brand CAPITAL product series. The main products are cooling fan, DC/AC fan, radiator, filter, reactor etc. We can provide customer with the most professional and perfect technical support, welcome to contact me at anytime at rainlee@szcpt.com.

2025/01/03

SanAce San Ace cooling system/cooling fan

SanAce San Ace cooling system/cooling fan

SanAce San Ace cooling system/cooling fan San Ace is a general term for the cooling system product brand of SanAce Electric, including cooling fans, modules, etc. The product is mainly used to meet the needs of communication equipment and medical equipment. Preventing overheating is crucial for devices equipped with electronic components. If the overheating problem is not controlled, the device will not function properly. The San Ace cooling system products provide heat dissipation and air supply functions, ensuring that these devices can be used stably on a daily basis. SanAce Electric is committed to developing industry-leading high-performance and high-quality San Ace products, aimed at helping customers improve the performance and reliability of their devices. DC fan: A DC fan with high reliability and performance. Including standard DC fans, high static pressure fans, low-power fans, silent fans, double reverse fans, centrifugal fans, drum fans, and forward and reverse fans. Suitable for cooling servers, storage devices, communication equipment, etc. Durable fan: A durable fan with excellent environmental resistance among DC fans. In addition to high and low temperature resistant fans that can be used in a wide temperature range of -40 ℃ to+85 ℃, there are also waterproof fans that can be used in water environments, long-lasting fans that can run continuously for up to 20 years, oil resistant fans that can be used in oil mist environments, and fans that can maintain stable operation in harsh environments. AC cooling fan: A highly reliable AC cooling fan. In addition to standard AC cooling fans, there are also efficient and long-lasting AC/DC fans that can convert AC power into DC power inside the fan for driving. Suitable for cooling information and communication equipment, control panels, FA related equipment, etc. Including AC/DC fans and AC cooling fans. Capital Technology Co., Limited is the chief agent of SANYO DENKI, one of the leading enterprises of the cooling fan industry. We are a factory who also have our own independent brand CAPITAL product series. The main products are cooling fan, DC/AC fan, radiator, filter, reactor etc. We can provide customer with the most professional and perfect technical support, welcome to contact me at anytime at rainlee@szcpt.com.

2024/12/31

Performance of SanAce Waterproof Fan

Performance of SanAce Waterproof Fan

Performance of SanAce Waterproof Fan The performance of SanAce waterproof fan can be regarded as a leader in the industry. Its outstanding performance is not only reflected in the solid and reliable waterproof function, but also in its comprehensive and refined design details. This fan uses advanced waterproof materials and technology to ensure stable operation in humid and watery environments, without fear of water splashes or brief immersion, providing solid protection for various outdoor or special application scenarios. Its waterproof rating has reached IPX5 or even higher standards, which means that even in the face of strong water jets, the key components inside the fan can continue to work efficiently and safely. This feature makes SanAce waterproof fans shine in humid environments such as seaside vacation homes, poolside, bathrooms, and even industrial production lines, becoming an indispensable tool for ventilation and cooling. In addition to outstanding waterproof performance, SanAce fans also have the dual advantages of strong wind power and silent operation. By optimizing the fan blade design and motor efficiency, it can output strong cool air at low noise levels, providing users with a comfortable user experience. Even if it runs for a long time, it will not produce disturbing noise, allowing tranquility and coolness to coexist. In addition, SanAce waterproof fans also have excellent durability and stability. Crafted with high-quality materials and exquisite craftsmanship, it can effectively resist natural erosion such as corrosion and aging, extending its service life. At the same time, the intelligent control system makes the operation more convenient, and users can adjust the wind speed and timing switch according to their actual needs, enjoying an intelligent and convenient life. SanAce Electric Waterproof Fan is an efficient, safe, and durable waterproof heat dissipation product widely used in household appliances, automobiles, industrial machinery, and other fields. It adopts advanced waterproof technology, which can effectively prevent the invasion of moisture and dust, ensuring long-lasting operation in harsh environments. The appearance design of this waterproof fan is unique and has a certain sense of fashion. It is highly compatible with scientific and technological applications. Materials with high strength can withstand various external impacts and vibrations, and have high stability and safety. At the same time, the product also has excellent heat dissipation performance, which can effectively reduce the temperature of electrical appliances during operation, improve the efficiency of electrical appliances, and prevent water damage. Fans also have the advantages of low noise and energy conservation and environmental protection. It adopts silent technology, which can effectively reduce the noise during operation and make people more comfortable when using appliances. At the same time, the product also adopts the design concept of energy conservation and environmental protection, which can effectively reduce energy consumption and environmental pollution. In summary, SanAce Electric's waterproof fan is an efficient, safe, and durable waterproof heat dissipation product with excellent heat dissipation performance and high stability, making it an ideal choice for fields such as household appliances, automobiles, and industrial machinery. Capital Technology Co., Limited is the chief agent of SANYO DENKI, one of the leading enterprises of the cooling fan industry. We are a factory who also have our own independent brand CAPITAL product series. The main products are cooling fan, DC/AC fan, radiator, filter, reactor etc. We can provide customer with the most professional and perfect technical support, welcome to contact me at anytime at rainlee@szcpt.com.

2024/12/27

< 1...22 23 24...49 >

Contact Us

Capital Technology Co., Limited
Tel: 0755-27087416 / 18316996909
Fax: 0755-23076120
QQ:1516156057 / 403432958
E-mail: sales@szcpt.com
Add: 111,Building B,Qianwan Zhichuang,Gushu Xiaweiyuan,Xixiang Street,Baoan District,Shenzhen

Mobile website

Copyright©2020 Capital Technology Co., Limited.

Powered by www.300.cn

0755-27087416
18316996909