solution-Capital-Cooling fan manufacturer

Service Hotline

0755-27087416/18316996909

Solutions

Cooling solution

Home page

Is the service life of DC fans affected by the environment

Is the service life of DC fans affected by the environment

Is the service life of DC fans affected by the environment In daily life, in order to extend the service life of DC fans and reduce the cost of equipment wear and tear, we will regularly inspect and maintain the DC fans in mechanical equipment. However, as the seasons change, the surrounding environmental temperature will also change accordingly. In spring and autumn, the temperature is suitable, and the winter is icy cold and the summer is scorching hot. So, is the service life of DC fans affected by the environment? Due to the influence of its material and bearings, DC fans are indeed affected by the environment and working pressure. If the DC fan operates in a high-temperature working environment, it will accelerate the evaporation of lubricating fluid in the oil bearing, causing equipment swelling and conflicts. The coil resistance will also increase, falling into a vicious cycle of heating and scalding, which will accelerate the aging rate of electronic components. The service life of DC cooling fans will be greatly reduced. Dust can cause changes in the distribution of fan blade mass, increase conflicts, increase wind resistance, affect self heat dissipation, make it difficult to transfer heat between the heat sink and the air, and cause electrostatic discharge to damage components and equipment. The harsh usage environment may greatly reduce the effectiveness and lifespan of the fan. If the working pressure of the cooling fan is high, the faster the fan speed will be, the faster the bearing wear will be, and the stator winding coils and electronic components will generate more heat, resulting in a relatively shorter lifespan. So the temperature of the surrounding environment actually has a significant impact on the lifespan of DC fans. Therefore, we should pay more attention to the maintenance and upkeep of DC fans in our daily lives. In the hot summer, we should try to take ventilation measures for mechanical equipment. Secondly, we should purchase high-quality DC fan products. Poor quality DC fans not only affect production but also cause unnecessary trouble. In daily life, we can choose an appropriate speed to reduce fan noise by understanding the relationship between fan speed and noise level. At the same time, other measures can be taken to further reduce the noise level of the fan, such as selecting a low-noise fan, adjusting the fan speed, installing shock-absorbing foot pads, and regular maintenance. Capital Technology Co., Limited is the chief agent of SANYO DENKI, one of the leading enterprises of the cooling fan industry. We are a factory who also have our own independent brand CAPITAL product series. The main products are cooling fan, DC/AC fan, radiator, filter, reactor etc. We can provide customer with the most professional and perfect technical support, welcome to contact me at anytime at rainlee@szcpt.com.

2024/01/15

How does the speed of the cooling fan affect the noise level?

How does the speed of the cooling fan affect the noise level?

How does the speed of the cooling fan affect the noise level? In daily life, we often encounter various types of fans, such as air conditioning fans, computer fans, ceiling fans, etc. These fans not only bring us coolness or heat dissipation, but also produce a certain amount of noise. So, what is the impact of fan speed on noise levels? How should we choose the appropriate speed to reduce the noise of the fan? 1、 The relationship between fan speed and noise level The higher the speed of the fan, the greater the air volume generated, and it will also bring higher noise levels. This is because when the fan rotates at high speed, the friction and airflow impact between the blades and the air will produce greater noise. Generally speaking, the noise of a low-speed fan is relatively small, but the air volume is also relatively small. Although high-speed fans have a large air volume, their noise is also relatively high. 3. Different types and specifications of fans have different optimal operating speeds. Therefore, when selecting a fan, it is necessary to choose the appropriate speed based on actual needs and environmental conditions. 2、 How to choose an appropriate speed to reduce fan noise? 1. Understand the optimal operating speed of fans: Different types and specifications of fans have their own optimal operating speed. Generally speaking, the optimal operating speed is between 1000-2000 revolutions per minute. Therefore, when purchasing a fan, it is necessary to choose a suitable speed range based on actual needs and environmental conditions. 2. Choose a low-noise fan: The low-noise fan has already taken this issue into consideration in its design, reducing noise by optimizing blade shape and reducing the number of blades. Therefore, when purchasing a fan, you can choose a low-noise model. 3. Adjusting fan speed: For some fans that can adjust the speed, the noise can be reduced by adjusting the speed. Generally speaking, adjusting the fan speed to a lower level can reduce noise, but it also reduces air volume. Therefore, it is necessary to find the optimal balance point based on actual needs and environmental conditions. 4. Install shock-absorbing foot pads: When installing the fan, shock-absorbing foot pads can be selected to reduce vibration and noise during fan operation. In addition, shock-absorbing foot pads can effectively absorb vibrations and noise from the ground. 5. Regular maintenance: For fans that have been used for a long time, regular maintenance is required, including cleaning dust, replacing lubricating oil, etc., to maintain their good operating condition and reduce noise levels. In daily life, we can choose an appropriate speed to reduce fan noise by understanding the relationship between fan speed and noise level. At the same time, other measures can be taken to further reduce the noise level of the fan, such as selecting a low-noise fan, adjusting the fan speed, installing shock-absorbing foot pads, and regular maintenance. Capital Technology Co., Limited is the chief agent of SANYO DENKI, one of the leading enterprises of the cooling fan industry. We are a factory who also have our own independent brand CAPITAL product series. The main products are cooling fan, DC/AC fan, radiator, filter, reactor etc. We can provide customer with the most professional and perfect technical support, welcome to contact me at anytime at rainlee@szcpt.com.

2024/01/09

The difference between SanAce DC cooling fan and axial cooling fan

The difference between SanAce DC cooling fan and axial cooling fan

The difference between SanAce DC cooling fan and axial cooling fan The cooling fan can be divided into many types based on its air supply form, such as axial flow, DC, centrifugal, etc. According to its different forms of electricity consumption, it can be further divided into DC and AC. What exactly is a DC cooling fan, and what are the differences between a DC cooling fan and an axial cooling fan? Simply put, a DC cooling fan converts electrical energy into mechanical energy through DC voltage and electromagnetic induction, thereby driving the rotation of the fan blades to achieve the purpose of heat dissipation. The DC cooling fan is operated using a DC power supply! The voltage of the DC power supply used must be consistent with the working voltage indicated on the fan. A battery is a DC power source. If it is used to drive a DC fan, in addition to charging, it is also necessary to check whether the voltage of the battery is consistent with the working voltage of the fan. If it is not consistent, a DC/DC converter should be used to change the voltage to be consistent. The principle of the operation of a DC cooling fan is based on the right-hand rule of the ampere. When a conductor passes through an electric current, a magnetic field is generated around it. If this conductor is placed in another fixed magnetic field, it will generate suction or repulsion, causing the object to move. A rubber magnet pre filled with magnetism is attached inside the blades of the DC cooling fan. Surrounding the silicon steel sheet, two sets of coils are wound around the axis, and Hall sensing components are used as synchronous detection devices to control a set of circuits that rotate the two sets of coils wound around the axis. The speed measurement signal of a DC cooling fan is generally output from a three lead plug. The yellow and black wires in the three leads are the+12V power supply and ground, respectively. The other color of the wire is the speed signal output wire. It should be noted that the third lead of some three lead DC cooling fans is not a speed measurement signal output line, but a speed control signal line, which inputs a speed control signal to the DC fan motor. So far, there are two types of monitoring methods for the fan itself: alarm sensors and speed sensors. The alarm sensor can provide an alarm signal when the fan speed is below a certain threshold value, and the speed signal output can achieve real-time monitoring of the fan speed. And axial flow cooling fan, also known as axial flow fan. Mainly suitable for exhaust in places such as dust and gravel yards; Medium sized axial fans are mainly suitable for indoor ventilation and heat dissipation, such as grain silos; Small axial fans are mainly suitable for ventilation and heat dissipation of mechanical equipment, such as electrical cabinets. When an axial fan is in operation, the blades push the air to flow in the same direction as the shaft, so it is called an axial fan. Capital Technology Co., Limited is the chief agent of SANYO DENKI, one of the leading enterprises of the cooling fan industry. We are a factory who also have our own independent brand CAPITAL product series. The main products are cooling fan, DC/AC fan, radiator, filter, reactor etc. We can provide customer with the most professional and perfect technical support, welcome to contact me at anytime at rainlee@szcpt.com.

2023/12/27

How to compare the performance of different cooling fans

How to compare the performance of different cooling fans

How to compare the performance of different cooling fans The selection of cooling fans is crucial for the performance and stability of electronic devices. However, facing numerous brands and specifications of fans in the market, how to evaluate and compare the performance of different fan specifications has become an important issue. This article will introduce some common testing methods and standards to help you evaluate and compare the performance of different fan specifications. 1、 Understand the basic parameters of fans Before evaluating fan performance, it is necessary to understand some basic parameters, including fan size, weight, air volume, noise, etc. These parameters can directly or indirectly reflect the performance of the fan. Among them, air volume is an important indicator to measure the cooling effect of the fan, while noise represents the comfort of the fan. 2、 Testing methods 1. Air volume test Air volume testing is an important step in evaluating fan performance. You can use a professional airflow meter to test the airflow of the fan, and observe the changes in airflow by changing the fan speed. Generally speaking, the larger the air volume of the fan, the better the heat dissipation effect. 2. Noise testing Noise testing can help evaluate the comfort of fans. A professional noise tester can be used to measure the noise level of the fan. When testing, it is necessary to place the noise tester at a certain distance from the fan to avoid the test results being affected by other factors. 3、 Measurement standards 1. Energy Efficiency Ratio (EER) Energy efficiency ratio is an important criterion for measuring the energy efficiency of fans. It refers to the ratio of the air volume generated by a fan per unit of time to the electrical power consumed. The higher the energy efficiency ratio of a fan, the higher the energy efficiency. 2. Power Consumption Power consumption is an indicator of fan energy consumption. The power consumption of fans of different specifications may vary. When evaluating fan performance, this factor needs to be considered. Capital Technology Co., Limited is the chief agent of SANYO DENKI, one of the leading enterprises of the cooling fan industry. We are a factory who also have our own independent brand CAPITAL product series. The main products are cooling fan, DC/AC fan, radiator, filter, reactor etc. We can provide customer with the most professional and perfect technical support, welcome to contact me at anytime at rainlee@szcpt.com.

2023/12/21

SanAce New Product: Low Noise 92 × 38mmDC fan

SanAce New Product: Low Noise 92 × 38mmDC fan

SanAce New Product: Low Noise 92 × 38mmDC fan 01 Features 1. Low noise Compared to our previous products, the noise is reduced by 5dB (A). 2. Energy saving Compared to our previous products, energy consumption has decreased by about 13%. 3. High static pressure Compared to our previous products, the static pressure has increased by about 8%. 4. Rich and diverse products The rated voltage is 12/24/48V, and there are 3 different speeds to choose from. The products are rich and diverse, and suitable specifications can be selected according to the customer's usage. 02 Purpose Suitable for industrial equipment, medical equipment, servers, etc. 03 Specification External dimensions: Å 92 × 38 mm thick mass: 210 g The following models come with PWM speed regulation and pulse sensors: Expected lifespan: 40000 hours (L10: residual rate of 90%, 60 ° C, rated voltage, continuous operation, free air condition) The following models come with pulse sensors: Expected lifespan: 40000 hours (L10: residual rate of 90%, 60 ° C, rated voltage, continuous operation, free air condition) Capital Technology Co., Limited is the chief agent of SANYO DENKI, one of the leading enterprises of the cooling fan industry. We are a factory who also have our own independent brand CAPITAL product series. The main products are cooling fan, DC/AC fan, radiator, filter, reactor etc. We can provide customer with the most professional and perfect technical support, welcome to contact me at anytime at rainlee@szcpt.com.

2023/12/18

The heat dissipation effect, noise, and energy consumption of the SanAce cooling fan

The heat dissipation effect, noise, and energy consumption of the SanAce cooling fan

The heat dissipation effect, noise, and energy consumption of the SanAce cooling fan In electronic devices, the cooling fan is a very important component, which can effectively reduce the internal temperature of the device and ensure its stable operation. However, when choosing a cooling fan, we need to consider multiple factors comprehensively, such as heat dissipation efficiency, noise, and energy consumption. This article will introduce how to balance these factors and choose the optimal cooling fan. 1、 Heat dissipation effect The heat dissipation effect is the most important consideration when choosing a cooling fan. A good cooling fan should be able to quickly reduce the internal temperature of the device to a safe range. When evaluating the heat dissipation effect, we can consider the following factors: 1. Fan air volume: Air volume is an important indicator to measure the cooling capacity of a fan. Generally speaking, the larger the air volume, the better the heat dissipation effect. However, air volume is not the only determining factor, and it is also necessary to consider the noise and energy consumption of the fan. 2. Fan's heat dissipation area: The larger the fan's heat dissipation area, the more heat it can dissipate. Therefore, when choosing a fan, one can choose a fan with a larger heat dissipation area. 3. Fan material: Fans made of different materials have different thermal conductivity. For example, metal fans have good thermal conductivity, while plastic fans are relatively poor. 2、 Noise When choosing a cooling fan, noise is also a factor to consider. A fan with excessive noise not only affects the performance of the device, but also affects the user experience. When evaluating noise, we can consider the following factors: 1. Wind noise of the fan: Wind noise is the sound generated by the airflow during the rotation of the fan. Generally speaking, the lower the wind noise, the lower the noise of the fan. 2. Fan vibration: Vibration can also produce noise. When choosing a fan, you can choose a fan with good seismic performance to reduce the noise generated by vibration. 3. Installation position of the fan: The installation position of the fan can also affect its noise. For example, installing a fan inside the device near the noise source can reduce the spread of noise. 3、 Energy consumption Energy consumption is another important factor to consider when choosing a cooling fan. A fan with excessive energy consumption not only increases the operating cost of the equipment, but also has a negative impact on the environment. When evaluating the time consumption, we can consider the following factors: 1. Fan power: Power is an important indicator for measuring fan energy consumption. Generally speaking, the higher the power of a fan, the higher the energy consumption. Therefore, when choosing a fan, it is possible to choose a fan with lower power to reduce energy consumption. 2. Fan running time: Running time is also a factor that affects fan energy consumption. If a fan needs to run for a long time, its energy consumption will correspondingly increase. Therefore, when choosing a fan, one can choose a fan with good energy-saving performance to reduce energy consumption. 3. Fan operation mode: Some fans have multiple operation modes, such as high-speed mode and low-speed mode. When selecting a fan, you can choose a fan with a better energy-saving operating mode to reduce energy consumption. Capital Technology Co., Limited is the chief agent of SANYO DENKI, one of the leading enterprises of the cooling fan industry. We are a factory who also have our own independent brand CAPITAL product series. The main products are cooling fan, DC/AC fan, radiator, filter, reactor etc. We can provide customer with the most professional and perfect technical support, welcome to contact me at anytime at rainlee@szcpt.com.

2023/12/14

< 1...29 30 31...49 >

Contact Us

Capital Technology Co., Limited
Tel: 0755-27087416 / 18316996909
Fax: 0755-23076120
QQ:1516156057 / 403432958
E-mail: sales@szcpt.com
Add: 111,Building B,Qianwan Zhichuang,Gushu Xiaweiyuan,Xixiang Street,Baoan District,Shenzhen

Mobile website

Copyright©2020 Capital Technology Co., Limited.

Powered by www.300.cn

0755-27087416
18316996909